5
OVERVIEW
RANGE
SEL
Temp
A
True RMS
MIN/MAX
HOLD
FAST
V
Apo
µA
mAµA
A
mA
10A
MAX
FUSED
400mA
MAX
FUSED
MAX
CAT III
600V
CAT II
1000V
DM515
°F°C
B
A
C
G
J
K
L
M
N
O
H
E
F
I
D
A. Apo:
Auto power off after 30 minutes of use. Press
and hold the HOLD button while turning the meter on
to disable Apo.
B. Digital Backlit Display
C. Range Button
• Press to change from auto ranging to
manual ranging.
• Press repeatedly to select proper range.
• Press and hold to return to auto range
(AT will be displayed on screen).
D. Min/Max Button
• Press to enter MAX/MIN mode.
• In the V, μA, mA or Amps function, either select
AC/DC or change to manual ranging before pressing
this button to enter MAX/MIN mode.
• Press repeatedly to alternate between Maximum and
Minimum readings.
• Press and hold to return to live readings.
E. Select Button:
• Press to select AC, DC or Auto Selection in the
following functions: Voltage, μA, mA, Amps.
• Press to select °C or °F in the Temperature function.
F. Function Dial:
Turns on meter and is used to select
the function.
G. Hold/Fast Button
• Press to hold the reading on the display. Press again
to return to live reading.
• Press to enter Fast MAX/MIN mode in
MAX/MIN mode.
• Press again to return to normal MAX/MIN mode.
H. Back Light Button:
Press to on back light. Press again
to turn off. Back light duration is 1 minute.
I. Category Max Indicator:
Maximum CAT Rating for
fused input jacks.
• Multifunction input port used for measuring: AC or
DC volts, resistance, continuity, diode, capacitance
µA,.mA, Amps, Temperature.
• Use CATIII test leads or higher
J. Recess for magnetic hanger
K. Test Lead Holders
L. Protective Rubber Boot
M. Battery Cover (under protective rubber boot)
N. Kick Stand
O. Serial Number (under kick stand)
