- 19 -
8. Turn the light bulb (14), (16) and (17) in the bulb holder (40),
(42) or (43) a further 90° clockwise.
Light bulbs required, see page 12.
9. Tighten the diffuser (39) via the screws again until
hand-tightened (38).
10. Push the rear light (9) gently into the holder (36) without
engaging it.
11. Route the cable (44) into the holder’s cable guide (36).
12. Guide the long lug of the cover (37) into the wheel rail (8)
and insert the cover (37) fully into the holder (36).
13. Push the rear light (9) fully into the holder (36) until the lock
engages audibly (35).
Note
Always use a clean cloth to pick up new light bulbs and insert
them into the bulb holders (40), (41), (42) or (43).
9
36
36
44
M+P-25A-0225
35
37
36 37
8
8
36
M+P-25A-0226
Fahrradträger_i21-i31.book Seite 19 Mittwoch, 19. April 2017 10:56 10