EN-51
english
F
General provisions
english
E
EN-50
Technical information
1. Explanation of symbols
This product complies with the Council Directive 93/42/EC from
5 September 2007 regarding medical devices and bears the mark
CE 0123 (TÜV SÜD Product Service GmbH).
Degree of protection against electric shock: TYPE BF
Batteries and technical appliances must not be disposed of with
domestic waste, but should be handed in at the appropriate
collection and disposal points.
Please observe operating instructions
2. Disposal
Storage and transportation conditions
Ambient temperature -5 to +50 °C
Protect against moisture/humidity
Rel. air humidity up to 85 %
Keep dry
4. Original spare parts and accessories
The following original spare parts and accessories are available from specialist
dealers:
Cuff type H5 (for wrist circumference 12.5-21.5 cm)
Part no. 2105001, PZN 06414493
Subject to technical modifications.
UEBE Medical GmbH
Zum Ottersberg 9
97877 Wertheim, Germany
Manufacturer:
5. Metrological inspection
(previously calibration)
Basically, a metrological inspection is recommended at intervals of 2 years.
However, professional users in Germany have to comply with the aforementioned
according to “Regulation for Operators of Medical Devices“. This can be
implemented either by UEBE Medical GmbH, an authority responsible for
metrology, or authorised maintenance services. For this, please observe your
national provisions. Upon request, responsible authorities or authorised
maintenance services receive a “Test instruction for metrological inspection“ from
the manufacturer.
Important: No modifications, e.g. opening the unit (except to replace the batteries)
may be made to this unit without the manufacturer‘s prior permission.
0123
C
M
Y
CM
MY
CY
CMY
K
Symbol Schutzgrad P2757C.ai 20.01.2010 09:22:19
Manufacturer
IP20
Protected against solid foreign particles with a diameter of more
than 12.5 mm, no protection against water.