EN-8
EN-9
Operating the unit
Operating the unit
Drug container
Locking button
Connection for air tube
AeroVital plus nebuliser unit
Sealing cap
Inhalation valve
Exhalation valve
Connection for
mouthpiece or mask
Nebulising button
Atomiser
Angle
adapter
• Gently twist the top part of the nebulizer bottle coun-
ter-clockwise to disassemble the nebulizer bottle. Make
sure that the nebuliser (blue) is securely fitted on the noz-
zle. (Image 1)
Application of the device
Clean the device and accessories thoroughly in the following cases:
• Place the device on a flat, stable surface. Make sure that you
can easily reach the controls while seated.
Please note the instructions on cleaning and care from page 19.
• Fill the drug container with the amount intended for the
treatment of the drug prescribed by your doctor (Image 2).
The maximum fill level for the drug container is 6 ml. Please
note the markings on the exterior!
• Carefully screw the upper part clockwise to close the con-
tainer. Check if you have screwed both pieces together cor-
rectly (Image 3).
• Attach the angle adapter to the nebu-
liser unit (Image 3).
– Prior to first use
– If using the device again after a prolonged period
– If the device is used by multiple people
Image 1
Image 2
Image 3
• Attach one end of the air tube to the
underside of the nebuliser unit (Im-
age 4).
• Secure the other end of the air tube to the air-tube connector on the side
of the compressor.
Image 4