VoutQ Switcher User’s Guide
4
UDP Co., Ltd.
E
2. Usage of VOutQ Switcher
2.1. Starting VOutQ Switcher
When VOutQ Switcher starts, the UI detects comport automatically And if comport auto-
detection is succeed, the UI is set with default setting as below.
VOutQ Switcher Default Setting are:
•
Video Format :NTSC
•
Channel Map VInputPort : Arranged in ascending order from 0 to 15
•
Enable VideoOutput : All of four video ports are enabled.
•
Video Adjust: All channels are set with default value 128
When you run the VOutQ switcher program and you can see the each setting values are
correctly showed as below picture, that means comport configuring and opening with default
settings are successfully finished.
•
Open ComPort with : The port number this VOutQ card uses currently (ex. COM4)
•
Fpga Ver : Shows the FPGA version (ex. 128)
•
Up Info : Shows the Micro Processor version this VOutQ card have (ex. 103)
•
Board ID : Shows the ID set on the Board ID Dip Switch (ex. 1)
