NVC/IPE Series
IPE3500M Installation Guide
02A.07
UDP Technology Ltd.
10
4.2. Manual adjustment for 3-axis movements
After installation, make a manual adjustment on the lens body. Perform 3-axis movements
manually by turning the lens body to different directions as above, and check if it moves
properly.
Note
i
If a camera with a high zoom lens is subjected to an environment with
temperature variation (approximately 10
˚
C, but dependable on the zoom
level), there may be a focus shift causing a blurry image. Make sure to consider
the installation environment when you use a high zoom lens.
4.3. Setting the Image Attribute
You can set the image attribute of camera through the webpage.
The menu of image attribute can be seen under
Setup > Video & Audio > Video-in > Attribute
Setting
. Brightness, contrast, saturation and sharpness can be adjusted.
