1
5
DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
according to Machinery Directive (2006/42/CE and subsequent amendments) and the implementing provisions.
The manufacturer:
UDOR S.p.A.
Via A. Corradini, 2 - 42048 Rubiera (Reggio Emilia) - Italia
in the person of its legal representative
declares under its sole responsibility that the “partly completed machinery” of its own production, namely:
Diaphragm Pumps, series
ZETA - ZETA-P - RO - IOTA - KAPPA - DELTA - OMEGA - BETA
which this declaration is referred to, is in conformity with the essential safety requirements of Directive 2006/42/EC, for which it is
applied and respected in all the essential issues:
• from 1.1.1 to 1.1.3
• from 1.2.6 to 1.3.2
• 1.3.8.2
• 1.5.13
• 1.7.2
• from 1.1.5 to 1.1.5
• 1.3.4
• from 1.4.1 to 1.4.2.1
• from 1.6.1 to 1.6.2
• from 1.7.4 to 1.7.4.3
• 1.2.4.3
• from 1.3.7 to 1.3.8
• from 1.5.2 to 1.5.8
• from 1.6.4 to 1.7.1
with the Relevant Technical Documentation conforming to the annex VII B.
They also comply with the following Standard: UNI EN 809.
It is additionally specified that:
• The Relevant Technical Documentation is kept at UDOR S.p.A. premises in: Via A. Corradini, 2 – 42048 Rubiera (Reggio Emilia)
– Italy, in the person of its legal representative.
• Any reasoned request by national authorities will be fulfilled with the relevant information on the “Partly Completed Machinery”.
• The “Partly Completed Machinery” Diaphragm Pumps cannot be operated until the machine where they are incorporated into, has
complied with the same Directive 2006/42/EC and with the other potentially applicable Directives.
Rubiera,
29/12/2009
Marco
Zanasi
(CEO UDOR S.p.A.)
is forbidden to reproduce or translate any part of this manual without written authorisation from the owner.
UDOR S.p.A. reserves the right to add modifications to the products, information and illustrations herein without notice..