manualshive.com logo in svg

Udirc DISCOVERY WIFI, Operation Manual, Page: 16 / 24

Share
Download
Udirc DISCOVERY WIFI Operation Manual Download Page 16

16

Virtual Control Interface

Important Tip: Ensure the drone is put on a flat surface in horizontal position so

                       that the drone can work well. Or it may be fail to be controlled.

00:00

Thruster:128%

Rudder:128%

Elevator:128%

Aileron:128%

EMERGENCY

3. Introduction for APP Icons

3.1 1. Home Page Icons

3.2 2. Remote Control Interface

L

R

Explore UDIRC Drone

Learn the operation of Drone

Remote control interface

Help

Media

EMERGENCY

Home Page Icon 

Click on the icon and back to home page.

Click on the icon to enter virtual reality mode to 

experience first person view (only available when 

using with a VR headset). Click on the icon again 

to exit from virtual reality mode.  

Click on this icon and it turns red. Draw a flight route in the right area. The drone

will fly according to the flight route. Click on the icon again to exit from Flight

Route Setting Mode. The icon turns white.

The icon is red by default. Click this icon and the propellers will stop immediately.

The drone will fall down to the ground straightly.
Tip: Do not use the emergency stop function unless in emergency situation.

Virtual Reality Mode 

Flight Route Setting Mode

Emergency Stop 

TF Card

If there is no TF Card in the drone, the icon shows as         . There is TF Card in

the drone, the icon shows as        .

Summary of Contents for DISCOVERY WIFI

























Reviews:

No comments