08
1>-3
2)
4)
5)
6)
7)
3)
Assembly of model battery
1)
Pull out the
clips
Remove the battery
hold-down
Battery hold-down reset
Clips reset
The battery output port and
the ESC input port are
correctly connected.
Press for 1 second to turn on the power.
The lights flash and enter the frequency
matching state. Press for 2 second to turn off
the power.
After the battery is assembled, reset the body.
Put the battery in the slot
The battery contains less power when leaving the factory, so it must be charged and saturated before use.
Connect the attached charger with the model battery charging input port, and then connect other USB output ports. When
charging, the charging indicator is flashing, and the indicator is always on after charging. Do not put the battery in the
model when charging. The battery must be cooled before charging.