11
12
19
Instruction for Receiving Board
The drone works well only when the installation direction of the receiving board and the
connection position of the wires the same as below picture:
Left
Right
Front
Rear
1
2
3
4
8
7
6
5
9
Switch Wire
Barometer
Left-front light wire
Left-front motor wire
Left-rear motor wire
Left-rear light wire
Right-rear light wire
Right-rear motor wire
Right-front motor wire
Right-front light wire
Spare Parts
For convenience, the spare parts are listed for you to choose, which can be purchased
from the local distributor. ( Please refer to the exploded view below to check the circled
icon)
U42-01
Upper Cover
U42-02
Lower Cover
U42-03
Propeller
U42-04
Propeller Guard
13
10
1
7
9
U42-09
Counterclockwise
Motor Parts
(Black and White Wire)
U42-10
LED
U42-11
Receiving Board
U42-12
Drone Battery
U42-05
Landing Gear
U42-06
Main Casing
U42-07
Lamp Cover
U42-08
Clockwise Motor Parts
(Red and Blue Wire)
18
21
11
14
12
U42-17
Transmitter
U42-13
USB Charger
U42-14
Camera Box
U42-15
Card Reader
U42-16
TF Card
15
16
Installation of Propeller Guard
Landing Gear Installation Diagram
Install the propeller guard to the drone and lock the propeller guard by attached screws.
Remove the screw from the propeller guard and pull out the propeller guard with
moderate force.
Note: Fly the drone without the propeller guard can improve
the power and flight time.
Install the landing gear to the hole in the drone as the diagram indicates.
Note: Please install the landing gear perfectly. If the landing gear can not stand firm on
the ground, it will effect the flight stability.
