RC Boat Battery Installation
1. Twist the cabin cover switch towards counterclockwise
direction and spare no effort to lift the cabin cover upward.
2. Put the Li battery to the battery box of
the hull. (put the battery wire to boat side)
3. Connect the battery with the power plug.
4. (1) Insert the cabin cover to the hull. (2) Press upper cover. (3) Twist the two cabin cover
switch tightly / press to buckle the cabin cover tightly.
Note: 1. Make sure the battery stay in the battery holder to prevent battery dislocation
or damaged.
2. Install the cabin cover and buckle it in place to prevent water penetration.
5
6
Operating Method
1. Pull back the throttle trigger of the transmitter and the boat goes forward.
Forward
2. Push forward the throttle trigger of the transmitter and the boat goes backward.
Backward
Code Pairing Between Transmitter and RC Boat
Power on the transmitter, and the power indicator light of the transmitter flashes and
issues sound of “di”. Put the boat into water and the transmitter issues constantly
sound of “dididi”. The power indicator light of the transmitter keeps bright, which
indicates successful code pairing and the boat is ready to be operated.
3. Pull back the throttle trigger of the transmitter, and twist the rudder knob towards
counterclockwise direction and the boat turns left.
Turn Left
4. Pull back the throttle trigger of the transmitter, and twist the rudder knob towards
clockwise direction and the boat turns right.
Turn Right
3
2
1
