background image

Operating Method

1. Pull back the throttle trigger of the transmitter and the boat goes forward.

2. Push forward the throttle trigger of the transmitter and the boat goes backward.

3. Pull back the throttle trigger of the transmitter, and twist the rudder knob towards

    counterclockwise direction and the boat turns left.

4. Pull back the throttle trigger of the transmitter, and twist the rudder knob towards

    clockwise direction and the boat turns right.

Forward

Backward

Turn Left

Turn Right

RC Boat Battery Installation 

1. Twist the cabin cover switch to left or right, 
    and then forced upward to lift the cabin cover.

2. Put the Li battery to the battery box of
    the hull. (put the battery wire to boat side)

3. Connect the battery with the power plug.

4. (1) Insert the cabin cover to the hull. (2) Press upper cover. (3) Twist the cabin cover switch
         till pressing down the cabin cover tightly. 

Note: Push the battery wire to the boat side to avoid getting stuck or cutting off by gear. 

Frequency Pairing Between Transmitter and RC Boat

Power on the transmitter, and the power indicator light of the transmitter flashes and

issues sound of “di”. Put the boat into water and the transmitter issues constantly

sound of “dididi”. The power indicator light of the transmitter keeps bright, which

indicates successful frequency pairing and the boat is ready to be operated.

5

6

3

2

1

Summary of Contents for UDI003

Page 1: ...to the transmitter the transmitter power indicator light turns solid to ensure the low voltage alarm function works well 8 Please power off the transmitter and the boat when the boat not in use 9 Please attach great importance on safety first when sailing If the boat out of control retrieve the boat by safe and reliable method Never retrieve the boat without any safe measure Maintenance and Repair...

Page 2: ...to battery box in accordance with the positive and negative pole indication and then close the battery box Battery Box Battery Cover Connect the battery with USB wire and then connect the USB with the computer or the adapter The USB light is red when charging and turns to green when fully charged The charging time is about 90 minutes Please cut off the charging wire after fully charged 3 4 Capsize...

Page 3: ...forced upward to lift the cabin cover 2 Put the Li battery to the battery box of the hull put the battery wire to boat side 3 Connect the battery with the power plug 4 1 Insert the cabin cover to the hull 2 Press upper cover 3 Twist the cabin cover switch till pressing down the cabin cover tightly Note Push the battery wire to the boat side to avoid getting stuck or cutting off by gear Frequency P...

Page 4: ...itter back to middle press backward trim till the boat stop going forward 9 If the boat still goes backward when the throttle trigger of the transmitter back to middle press forward trim till the boat stop going backward Screw Rod Main Arbor Pipe Navigation Rudder USB Wire Circuit Board Support Holder Steering Engine Rod UDI003 04 UDI003 09 UDI003 10 UDI003 11 Li Battery UDI003 14 UDI003 12 Transm...

Reviews: