②
①
Charging Instruction
Battery power is insufficient in the original plant. It must be charged
saturated before it can be used.
Connect the original charging cable with the drone, and then connect other USB
charging port. The drone red LED keeps bright when charging and the light turns
green when fully charged. The drone power button should be
turned off when charging.
Original Charging Cable
▲
Only use the original charging cable; suggest select Adapters with output current of 5V 2A.
USB adapter
(Not included)
Right Stick
Speedswitch
Heading Hold Mode
Power Switch
Power-LED
Left stick /
Trimmer
(Press down)
No function
Take Off / Landing /
Emergency
Stop Button
Battery installation
Open the battery cover on the back side of the
transmitter
，
according to the "+-" electrode
instruction in the battery groove, place the
battery with the same type of saturated power
(battery not include).
Battery cover
Back side of the transmitter
3×1.5V AAA
Alkaline Batteries
Transmitter preparation
3
