L l a m a d a e x t .
z o n a 1
z o n a 1
z o n a 1 6
L l a m a d a :
L l a m a d a :
1 0 1
In standby, the screen shows the software version
and the number of desk.
The call appears on the screen, indicating the extension number
assigned to the calling area.
of a call to extension 101
Example
The call appears on the screen, indicating the extension number
and then the name assigned.
join call from
Extension 116 (Room 16)
Example:
Then join the list of incoming calls on a first come.
And then, it shows the name assigned to the extension
HOLD DISPLAY
CONFIGURATION
INCOMING CALLS VIEW
I D - 2 0 0
( v _ . _ )
P u p i t r e 1 ( 1 )
By the
software you can change the following:
By default are called zone 1, zone 2, ... But we can give the name we want to each zone by the
letters and numbers, with a maximum of 19 characters.
This is the identification number of the zone, it can have up to four digits.
By default with a single desk, all zones will be assigned to a no. 1 desk.
Each zone can be assigned to the floor you want. This affects mainly the response by telephone.
You can choose the name for each room (sound) and the floor to give the message through the
telephone interface: Room, Area, Gate (in the menu of available words).
ID-200 UdeConf
Name of each area:
Extension number for each zone:
Assigned desk to each zone:
Floor:
Sound by phone:
INTERCOM-200 System
10
3
650.016A
rev.
0
