How to start up the unit
INSTALLATION:
Note:
ADJUSTMENTS:
FACTORY SETTINGS:
- Mode 1 operation (standard).
- Access code: 1, 2, 3.
- Impedance: 4
MODE 1 (standard)
MODE 2 (programmed)
Install the optional accessories (if applicable). See graphic.
Configure inputs 1, 2, 3 and 4 (music microphone, voice microphone, music microphone with
phantom power supply, voice microphone with phantom power supply or auxiliary input). See
graphic.
The unit should be connected as per the connection diagram, according to specific
requirements. Special care should be taken to comply with any applicable safety standards.
Do not block the front and rear air vents in order to make sure the unit will work properly.
Start up the unit and make any adjustments you require:
- Impedance
- Per-input volume (1 to 5)
- Master volume
- Treble
- Bass
- Programming (1 to 8)
- Operating mode (standard or programmed) selection
The unit is now ready to operate
.
- Volume: 7.0
- Treble: 0
- Bass: 0
The 8 programmes recorded have the same values:
- Volume: 7.0
- Treble: 0
- Bass: 0
We recommend you set the volume to 0 for programmes that are not used.
AX-309
16
5
610.104A
