UCS C-SV 4A, User Manual

Page: 11 / 56

Doc. 85588U - Rev. 22/10/2020
USER MANUAL USER MANUAL
EN EN
Drw. 32367/h 11/54
7. INSTALLATION
7.1 Control panel positioning
3
4
The control unit installation must be carried out only by competent and qualified staff.
Make sure that a differential switch (circuit breaker) has been installed upstream the line and that it functions properly.
Remove earth cable “ A ” placed on the
control unit door.
Mark on the wall the position of the
fixing holes.
Drill the wall and fix the box.
Choose adequately the fixing system
according to the wall type to which the
control unit is fixed.
Remove plate “ B ” from box “ C ” to gain access to the fixing holes.
Before carrying out any intervention on the electrical system, disconnect the power supply by means
of main switch.
The control panel is to be located in a safe place, protected from the effects of fire and smoke.
For C-SV IB 4A/8A version, disconnect connectors “ D ” of the push button
panel and emergency push button panel.
WARNING WARNING
1
A
2
C-SV 4A/8A
C-SV IB 4A/8A
B
C
C
D
B