UCS C-SV 20A, User Manual

Page: 6 / 56

Doc. 85860I - Rev. 22/10/2020
USER MANUAL USER MANUAL
EN EN
Drw. / Dis. 33942/h 6/54
A
2. PACKING CONTENTS
3. UNPACKING
4. DATA PLATE
The control units are delivered in a box inside which there are the use manual and the following components:
- 6 plugs (A)
- 6 fixing screws (B)
- 1 cabinet opening key (C)
- 6 transparent gaskets (D)
- 3 “earthing” adhesives (E)
- 1 gasket for the upper plate (F)
The manufacturer’s identification and European Directive conformity plate is located on the control unit.
Several safety warnings are applied to the control unit; such warnings must be strictly followed by everyone dealing with this product.
The company is not to be held responsible for damage to property or accidents to people which might occur if the above-men -
tioned warnings are not observed. In such a case, the operator is the only person responsible.
Check the control unit. Before installing the control unit, check to ensure that all of the items listed are present and that there
are no visible signs of damage.
1. Remove the control unit from the box.
2. Remove all the components from the packaging.
The identification plate CE/EAC is located on the left lower part of the control unit.
Manufacturer’s identification
CE/EAC marking
Model
Electrical features
Part Number Serial Number
C
E
B
D
F
WARNING WARNING
EN12101:10 Certification
Production date