4
4.
Firmware Update
After recognizing as U Disc, firmware file (dso212.bin) must be copied in UCE-DSO212 U Disc
(Figure 6).
And then reset the device. To reset the device, you can press ‘RESET’ button (Figure
4).
Figure 6.
After reset, the update progress will start and there will be some information about process on the
screen (Figure 7). At the end of the process, the firmware file is deleted.
Figure 7.
The firmware update causes to lose all stored data such as oscilloscope configuration, touch panel and ADC
calibration etc. So, at the first boot, oscilloscope ask you to calibrate the device.
