2015.03.20
V1.0
3
Support multi device mode
Baud rate support: 1,200 / 2,400 / 4,800 / 9,600/ 19,200 / 38,400 / 57,600 / 115.200
bps, (Default is 9600bps)
Hopping Frequency: 433.3MHz, 433.6MHz, 434MHz, 3 Chanel
6. Configuration API command via UART:
(Hex format)
98 95 93 AB
6.1 A byte (Hex)
0X = NONE(
預設值
) ; 1X = ODD ; 2X = EVEN
6.2 B byte (Hex)
X0 = 9600(
預設值
)
X1 = 1200
X2 = 2400
X3 = 4800
X4 = 9600
X5 = 19200
X6 = 38400
X7 = 57600
X8 = 115200
7. Firmware upgrade:
8. Data format:
Firmware upgrade:
1. Press “Pairing” key for
3 seconds, TX/RX LED
is On
2. Continuous press until
TX/RX LED is Off
3. Select Firmware
4. Setup:
Start Address: 0x0000
Program Size: 0x157F
Baud: 9600
None Parity
1 Stop bit
5. Start Program
