Uconnect BLE-232R, User Manual

Page: 2 / 4

BLE Beacon RS-232 Reader user manual V1.3 2018.06.24
2
2.2 DB9 connector: (Male)
Pin Signal DTE Direction DCE Direction Description
1 N/A
2 RxD Output
Input
Transmitted data
3 TxD Input
Output
Received data
4 N/A
5 GND Ground
6 N/A
7 RTS
8 CTS
9 Vin Power Input (5~27 VDC)
2.3 Rear Side:
3. Packet Format:
3.1 All DIP switch is “0” by default. The reader will filter “ Uconnect ”, “ iBeacon ”,
“ Eddystone ” or “ Altbeacon ”.
$<msg type>,<reader id>,<tag type>,<tag id>,<battery>,<button>,<G-sensor>,<sensor>,<RSSI>#
Field Description
$ start of report
msg type Type of message ex. 0: reserved, 1: Uconnect tag
2: iBeacon, 3: Eddystone, 4: Altbeacon
reader id 6 bytes ID of reader in hex => 12 chars
tag type (*) type of tag ex. 1: tag w/o g-sensor, 2: tag w/ g-sensor ..
DIP Switch
▲
DCE
▼ DTE
2: RX 3: TX
5: GND 9: Vin
DCE/DTE:
Swap TX & RX