MESH INTERCOM PAIRING
MESH INTERCOM PAIRING
PAIRING MOTION UNITS WITH UCLEAR AMP SERIES UNITS
Begin with all AMP units in power
OFF
state, all MOTION units in power
ON
state.
Next enter paring mode on MOTION unit(s).
Press and hold
QUICK ACCESS
for 5 secs on
MOTION unit(s) until LED blinks
purple
.
When all units to be paired are blinking
purple
, press
POWER
on any MOTION unit to initiate paring sequence.
Units will double-blink
green
as they are connected.
All but 1 unit will be blinking
green
. Press
POWER
on
the last unit still blinking
purple
to end the pairing
sequence. All units should be blinking
green
.
Start by powering on all AMP units directly into pairing mode
by holding
POWER
&
UP
until device(s) blink(s)
purple
.
2
1
3
4
5
5
x1
x1
12
Summary of Contents for Motion Series
Page 1: ...USER MANUAL V1 1...
