EN
23
Intercom Operations
*After this pairing, it is recommended to power off both units before
you start the intercom.
*Start / disconnect can only be controlled
by HBC unit, not applicable to other brands.
Start Intercom
d) Make sure you have turned on paired other brand
headset and HBC unit that has being paired.
Start off your intercom by press & hold the
'Volume UP' button for 2 seconds.
Disconnect Intercom
e) To disconnect intercom by press & hold
the 'Vol DOWN' button for 2 seconds
a) Power up & setup the [other brand] bluetooth headset in HFP pairing.
*Note: HFP mode is the simple mode just like paring to a mobile phone.
Refer to other brands owner manuals for instructions**
Setting up Cross-Brand Intercom
**Please take note that you will only need to pair this ONCE.
b) Powered on your UClear HBC by
pressing & holding the power button
for 8-10 seconds.You will be notified
by blinking purple LED. The two units
will sync and followed by blinking blue
LED twice at 4 seconds interval at the
indicator. At this stage, pairing is successful.
Intercom should be auto enabled.
Summary of Contents for HBC200
Page 1: ...Helmet Communicator User Manual HBC200 ...
Page 36: ...US PUB 200MAR14 ...
