U
C
LEAR
TM
13
Your
U
C
LEAR
TM
HBC100 helmet communicator is now setup
and ready to go!
The operations described here are applicable to all modes
of operations
.
Power On
•
Hold the
Answer
button for 2 seconds to power on the helmet
communicator. The status indicator will blink blue and a
power up tone can be heard.
Power Off
•
To switch off the helmet communicator, press and hold the
Answer
button for 5 seconds. The status indicator will blink
red 5 times followed by a long beep before fully shutting
down.
Power Save Mode (Auto Power Off)
•
If intercom had been in use before, and all other Bluetooth
devices have been disconnected, the system will auto
shutdown in 1 hour. Else system would auto power off after
10 minutes of not connecting to any other device.
Low battery
Up
button
Speaker /
charging socket
Down
button
Status
indicator
Answer
button
General Operations
