7
(5) Thermal protector
If a motor stopped during punch, the thermal protector may operate. Turn off the power supply
and check the thermal protector.
When thermal protector running, push a button of the thermal protector after passing more than
one minute.
4. Specifications
Punch depth
50mm
Diameter of drill bit
3/3.5/4/4.5/5/5.5/6/6.5/7/8/9/10/11/12/13mm
Back margin
6 to 35mm (normal)
16 to 35mm (3 to 4.5mm drill bit)
9 to 35mm (9 to 13mm drill bit)
Maximum paper length
376mm
Automatic centering
Table size
W480 x D260 mm
Dimensions
W480 x D430 x H620 mm
Net weight
35kg
Power
115V
220V
240V
AC 50/60Hz 200W
Power cord length
2m (Vinyl-covered)
5 Ordering consumables, etc.
When ordering consumables or parts such as fiber plug, specify the machine model.
Caution
Turn off the power supply beforehand when setting the thermal
protector. There is a danger of receiving an injury.
Keep this “Operation Manual” at an appointed place with care so that it may be available whenever
required.
If this “Operation Manual” is stained or lost, make contact with the distributor or our salesman or customer
service section to ask for a new operation manual after making sure of its contents.
When transmitting this product to another person, be sure to attach this “Operation Manual” to the product.
UCHIDA YOKO CO., LTD.
9-15, Shiomi 2-chome, Koto-ku, Tokyo, Japan
Tel: 81-3-5634-6350
Fax: 81-3-5634-6856
E-mail: [email protected]