9
(4) Designation and Functions of Operation Panel
F-45N
(13)
(14) (15) (16) (17) (18) (19)
(12)
(10)
(8)
(9)
(6)
(5)
(7)
(11)
(4)
(1)
(2)
(3)
F-43N
(13)
(14) (15)
(18) (19)
(12)
(10)
(8)
(9)
(5)
(7)
(11)
(4)
(1)
(2)
(3)
No.
Designation/Indication
Function
(1)
Fold type key
Six folding types can be input and stored.
(2)
Test key
Test folds two sheets without counting.
(3)
Start/Stop key
Starts and stops the machine.
(4)
Clear/Reset key
Clears counter indication and resets error.
(5)
Store key
Fold position after adjustment is stored.
(6)
Memory 1/2/3 key
Three special folding types are stored. (only for F-45N)
(7)
Select key
Used for selecting the indication of the counter, the position of the
stopper stud of Table 1 and 2, the position of paper ejection roller,
paper length.
(8)
Perforation mode lamp
It lights when the optional sewing unit is installed.
(9)
+/–key
Used for adjusting the position of the stopper of Table 1 and 2, the
position of paper ejection roller, paper length
(10)
Speed adjustment key
Used for adjusting the speed.
(11)
Numerical key
Used for inputting the reduced number for subtraction counting and
the length of non-standard-size paper
(12)
Counter
Shows the number of sheets, the position of the stopper pin of Table 1
and 2, and paper size.
(13)
Check lamp
It lights when paper stock runs short, or indicates the location where
paper feed trouble occurs.
(14)
Table 1 stopper move mode lamp
It lights when the position of stopper of Table 1 is adjusted.
(15)
Table 2 stopper move mode lamp
It lights when the position of stopper of Table 2 is adjusted.
(16)
Paper ejection roller move lamp
It lights when the position of the paper ejection roller is adjusted
(only for F-45N).
(17)
Paper length input mode lamp
It is on when paper length is input (only for F -45N).
(18)
Counter input mode lamp
It lights when reduction is indicated on the counter.
(19)
Paper size input mode lamp
It lights when paper size is indicated.
