LT---- Iss - (--/--)
18
UC Living Rosmore Maintenance Instructions
SECTION TEN Maintenance Instructions Continued
REPLACEMENT OF INJECTOR
1.
Repeat operations 1-2 for removal of burner and or silencer.
2.
Disconnect gas connection to injector.
3.
Unscrew the locking nut fixing injector to mounting bracket.
4.
Clean or replace as necessary.
5.
Re-assemble in reverse order pushing burner to right hand side for pebble bed before
securing screws.
6.
Turn on gas supply, check for gas soundness and re- commission appliance.
REPLACEMENT OF OXY-PILOT ASSEMBLY
NOTE:
If the pilot assembly is replaced it must be replaced by an identical unit from the same
manufacturer and replaced as a complete unit.
1.
Carefully remove all coals/pebbles and ceramic baseboards
2.
Disconnect gas supply.
3.
Remove 4 screws securing tray to firebox, 2 at base of bezel and 2 inside firebox and lift
out tray.
4.
Disconnect the thermocouple from the gas control tap.
5.
Disconnect the gas connection from the pilot assembly.
6.
Remove ignitor lead from pilot assembly.
7.
Undo the two screws securing the oxy-pilot to the burner.
8.
Re-assemble the in reverse order.
9.
Turn on the gas supply, check for gas soundness and re-commission appliance.
UC Living
27 Fernbank Road
Bangor
BT19 6GA
Telephone 353 4854325
E-mail :
www.ukliving.co.uk
Summary of Contents for Rosmore
Page 24: ...LT Iss 24 Blank Page ...
Page 25: ...LT Iss 25 ...
Page 26: ...LT Iss 26 ...
Page 27: ...LT Iss 27 ...