(7) Do not store the battery for a long time after it is completely discharged, as it may cause
damage to the cell in over-discharged state, which will render it unusable.
(8) Ulyte may be damaged if the device and accessories are subjected to heavy impact or
vibration. DO NOT use any chemical solutions or cleaning agent.
(9) Do not expose Ulyte to high temperatures, such as under sunlight, around heaters
、
microwave ovens
、
ovens or water heaters, etc., as overheating may cause explosion;
(10) If Ulyte is not used for more than 10 days, discharge the battery level to 40%-65% for
storage, as it may extend the service life of the battery effectively;
(11) Discharge and charge the battery completely once every three months to keep it in good
condition.
(12) Avoid touching or covering the heat dissipation area with your body because it may
become hot during usage and cause burns;
(13) Don't allow children or pets to swallow or bite the device or accessories as it may cause
them harm.
Ⅷ
. Name and Content of Hazardous Substance
Components
Name
Hazardous Substance
Pb Hg Cd
Cr (
Ⅵ
)
PBB PBDE
Plastic shell
Ο
Ο
Ο
Ο
Ο
Ο
Circuit
board
Ο
Ο
Ο
Ο
Ο
Ο
Metal
Χ
Ο
Ο
Ο
Ο
Ο
Cable
Ο
Ο
Ο
Ο
Ο
Ο
This table is compiled according to the stipulation of SJ/T 11364.
○
: refers to the condition that the content of the hazardous substance in all homogeneous materials
is within the limitation of GB/T26572 requirements.
×
: refers to the condition that the content of the hazardous substance in one homogeneous material
of the component exceeds the limitation of GB/T26572 requirements.
