User Manual for ADIBOT-A
18
/
50
Shenzhen UBTECH Robotics Corp Ltd.
3.1.2 Power-off
Steps:
Step 1: Press and hold the On/Off button (Figure 3.1.1.b) on the back for 3 seconds to shut down
the robot;
Step 2: (If the product will be used in a long time) Press the power button (Figure 3.1.1.a) on the
chassis to turn off the power supply.
Cautions:
1.
Decide whether to turn off the power supply according to the actual situation;
2.
It is strictly forbidden to Shut down the robot by perform step 2 before step 1, as it may damage
the robot.
3.2 Install the Charging Dock
Cautions:
1. Plug the charging cable into the dock and keep the back of the
robot against a wall.
2. Place the charging dock on a dry and flat ground and beside a wall
where few people pass by.
3. We highly recommend that no obstacles within 2m in front and
1m on the left and right of the charging dock.
Charging Dock Lights Status
LED
Status
Green light for a long
In charging
Red light for a long
Waiting for charge
●
R
ed l
amp flashing
Charging Dock abnormal
3.3 Charging
1.
Method 1: You can select a suitable power adapter and insert it into the charging port of the
robot straightly(Figure 3.3.a).
Figure 3.2
