NINA-B4 series - System integration manual
UBX-19052230 - R09
Open CPU software
Page 34 of 61
C1-Public
6.
Modify the “BOARD_” definition to
define the BOARD_CUSTOM.
Figure 13: Modifying the board definition in SEGGER Embedded Studio
3.1.2
Adding a board configuration to your project
Another flexible way of adding a board to your project can be to add a new build configuration to your
Segger Studio project and then use this to select the correct board file for your build. By adding several
configurations, you can build for several targets from the same Segger Studio project. For example,
your custom board and a u-blox EVK for testing your code on different platforms.
1.
Add a build configuration in the Segger Studio project
Figure 14: Add a build configuration to Segger Studio