MIA-M10Q - Integration manual
Configuration key
Value
CFG-HW-ANT_CFG_RECOVER
1 (true)
Table 34: Configuration for the 2-pin antenna supervisor design
Figure 38: 3-pin antenna supervisor design
The 3-pin antenna supervisor configuration required for the
reference design is listed in
Configuration key
Value
CFG-I2C-ENABLED
0 (false)
CFG-HW-ANT_CFG_VOLTCTRL
1 (true), default (no configuration required)
CFG-HW-ANT_SUP_SWITCH_PIN
7, default (no configuration required)
CFG-HW-ANT_CFG_SHORTDET
1 (true)
CFG-HW-ANT_CFG_SHORTDET_POL
0 (false)
CFG-HW-ANT_SUP_SHORT_PIN
3
CFG-HW-ANT_CFG_OPENDET
1 (true)
CFG-HW-ANT_CFG_OPENDET_POL
1 (true), default (no configuration required)
CFG-HW-ANT_SUP_OPEN_PIN
2
UBX-21028173 - R01
Appendix
Page 84 of 89
C1-Public