LISA-U series - System Integration Manual
UBX-13001118 - R17
Advance information
System description
Page 100 of 190
Name
Module
Description
Remarks
I2S_TXD
LISA-U120
LISA-U130
LISA-U2 series
12
I
2
S transmit data
Module output
I2S_RXD
LISA-U120
LISA-U130
LISA-U2 series
I
2
S receive data
Module input
I2S_CLK
LISA-U120
LISA-U130
LISA-U2 series
I
2
S clock
Module output in master mode
Module input in slave mode
I2S_WA
LISA-U120
LISA-U130
LISA-U2 series
I
2
S word alignment
Module output in master mode
Module input in slave mode
I2S1_TXD
LISA-U2 series
Second I
2
S transmit data
Module output
I2S1_RXD
LISA-U2 series
Second I
2
S receive data
Module input
I2S1_CLK
LISA-U2 series
Second I
2
S clock
Module output in master mode
Module input in slave mode
I2S1_WA
LISA-U2 series
Second I
2
S word alignment
Module output in master mode
Module input in slave mode
CODEC_CLK
LISA-U2 series
Digital clock output
Digital clock output for external audio codec
Configurable to 26 MHz or 13 MHz
Table 46: Digital audio interface pins
The I
2
S interfaces and
CODEC_CLK
pins ESD sensitivity rating is 1 kV (Human Body Model according to
JESD22-A114F). Higher protection level could be required if the lines are externally accessible on the
application board. Higher protection level can be achieved by mounting a general purpose ESD protection
(e.g. EPCOS CA05P4S14THSG varistor array) on the lines connected to the I
2
S interfaces pins, close to
accessible points, and a low capacitance (i.e. less than 10 pF) ESD protection (e.g. AVX USB0002) on the
line connected to
CODEC_CLK
pin, close to accessible point.
The I
2
S interface can be set to two modes, by the <I2S_mode> parameter of the AT+UI2S command:
PCM mode
Normal I
2
S mode
The I
2
S interface can be set to two configurations, by the <I2S_Master_Slave> parameter of AT+UI2S:
Master mode
Slave mode
The sample rate of transmitted/received words can be set, by the <I2S_sample_rate> parameter of AT+UI2S, to:
8 kHz
11.025 kHz
12 kHz
16 kHz
22.05 kHz
24 kHz
32 kHz
44.1 kHz
48 kHz
12
All LISA-U2 series modules versions except LISA-U200-00S