EVK-R8 - User guide
UBX-22018774 - R02
Setting up cellular packet data connection on Windows
Page 12 of 25
C1-Public
6.
Now the new modem is visible in
Control
Panel
, under
Phone and Modem
>
Modems
.
Any extra initialization AT command (e.g., to set
a specific APN name) can be entered by
selecting
Properties
and filling in
Advanced
>
Extra initialization commands
text box.
Now the module is ready, and the connection can be configured.
The modem configuration can also be edited in
Device Manager
, by clicking on the modem name.
4.2
How to install and configure a high data rate modem
connection
This example describes how to install and configure a high data rate packet data connection on a PC
with the Windows 10 operating system, using the TCP/IP stack of the PC, over the native USB
interface of the cellular module connected to the Windows PC by the Cellular Native USB connector
(J700 on the ADP-R8).
1.
From
Control Panel
, select
Network and
Sharing Center
>
Set up a new connection
or network
.
2.
Click
Connect to the Internet
and then
Next
.
