Ublox EVK-NINA-W13, User Manual

Page: 6 / 21

EVK-NINA-W13 - User Guide
UBX-17011007 - R04 Product description
Page 6 of 20
1.3 Jumper description
Parameter Description Name Default
Enable SW1 Jumper at J5-1_J5-2 connects switch 1 to module pin-7 J5 
Enable SW2 Jumper at J6-1_J6-2 connects switch 2 to IO-27
(Jumper at J14-15_J14-16 must be populated to connect IO27 to module pin-18) J6

Enable RGB-LED
Jumper at J7-1_J7-2 connects RED LED to IO-23
(Jumper at J15-3_J14-5 must be populated to connect IO23 to module pin-1) J7-1_2

Jumper at J7-3_J7-4 connects BLUE LED to IO-21
(Jumper at J16-1_J16-2 must be populated to connect IO21to module pin-8) J7-3_4

Jumper at J7-5_J7-6 connects GREEN LED to IO-33 J7-5_6 
IO/Interface select Module pin to IO/Interface distribution J14 See Table 3
IO/Interface select Module pin to IO/Interface distribution J15 See Table 3
IO/Interface select Module pin to IO/Interface distribution J16 See Table 3
IO/Interface select Module pin to IO/Interface distribution J17 See Table 3
IO/Interface select Module pin to IO/Interface distribution J18 See Table 3
Enable VCC_IO Connects EVK internal 3.3 V to module pin-9 to supply module VCC_IO J25 
Enable VCC Connects EVK internal 3.3 V to modle pin-10 to supply module VCC J26 
Table 1: EVK-NINA-W13 jumper descriptions
Figure 3: Jumper positions on the EVK-NINA-W13
J15 (pin-1)
J16 (pin-1)
J17 (pin-1)
J14 (pin-1)
J7 (pin-1)
J26 (pin-1)
J25 (pin-1)
J18 (pin-1)
J6 (pin-1) J5 (pin-1)