Ublox EVK-NINA-W1, User Manual

Page: 8 / 27

EVK-NINA-W1/EVK-NINA-B2 - User guide
UBX-17011007 - R08 Product description Page 8 of 27
C1-Public
1.4 Jumper description
Parameter Description Name Default
Enable SW1 Jumper at J5-1_J5-2 connects switch 1 to module pin-7 J5

Enable SW2 Jumper at J6-1_J6-2 connects switch 2 to IO-27
(Jumper at J14-15_J14-16 must be populated to connect IO27 to module
pin-18) J6

Enable RGB-LED Jumper at J7-1_J7-2 connects RED LED to IO-23
(Jumper at J15-3_J14-5 must be populated to connect IO23 to module
pin-1)
J7-RED

Jumper at J7-3_J7-4 connects BLUE LED to IO-21
(Jumper at J16-1_J16-2 must be populated to connect IO21to module
pin-8) J7-BLUE

Jumper at J7-5_J7-6 connects GREEN LED to IO-33 J7-GREEN

IO/Interface
select Module pin to IO/Interface distribution J14 See Table 3
IO/Interface
select Module pin to IO/Interface distribution J15 See Table 3
IO/Interface
select Module pin to IO/Interface distribution J16 See Table 3
IO/Interface
select
Module pin to IO/Interface distribution J17 See Table 3
IO/Interface
select Module pin to IO/Interface distribution J18 See Table 3
Enable VCC_IO Connects EVK internal 3.3 V to module pin-9 to supply module VCC_IO J25

Enable VCC Connects EVK internal 3.3 V to modle pin-10 to supply module VCC J26

Table 1: EVK-NINA-W1/EVK-NINA-B2 jumper descriptions
Figure 5: Jumper positions on the EVK. J25-J26 have swapped positon with the module on the EVB-NINA-W1x6 board.
Middle row jumper pin Connected to
J14-1 Module pin-28
J14-3 Module pin-29
J14-5 Module pin-1
J14-7 Module pin-21
J14-9 Module pin-20
J14-11 Module pin-16
J14-13 Module pin-17
J14-15 Module pin-18
J15 (pin-1)
J16 (pin-1)
J17 (pin-1)
J14 (pin-1)
J7 (pin-1)
J26 (pin-1)
J25 (pin-1)
J18 (pin-1)
J6 (pin-1) J5 (pin-1)