C101-D9S - User guide
UBX-20031865 - R02
C101-D9S operation with C099-F9P
Page 9 of 16
C1-Public
4
C101-D9S operation with C099-F9P
It is possible to use the C101-D9S board together with C099-F9P. Figure 9 shows how to interface the
C101-D9S board with the C099-F9P board.
Figure 9: C101-D9S - C099-F9P interfacing scheme
Figure 10 shows the placement of the Arduino connectors on the C101-D9S board and Figure
shows how to physically connect the C099-F9P board to the C101-D9S board via the Arduino shield.
Jumper J18 on the C099 board is needed for the ZED-F9P to receive the correction data on the UART1
port. See the C099 application board User guide [4] for further details.
Figure 10: C101-D9S Arduino connectors
