WWDLWx
User
Manual
Date: 19-Apr-2023
Version: 0.2.0
10.4 Factory Default Reset
Figure 10A
Figure 10B
13
- To remove all Custos WWD settings without involve LoRa Gateway or LoRa Server.
i.Pick up the Custos WWD;
ii.Shaking it as picture below (10A), you will get “beep” sound and Green LED blinking,
iii.Lay WWD at and wait for 2 sec, then You'll get 2 Buzzer Sounds with Green LED Lights 2
times.
iv.Roll the WWD as shown in (10B) so that all 4 sides of the WWD are facing down once.
v.You'll get 2 Buzzer Sounds with Green LED Lights 2 times.
vi.Once success. Green LED Lights up while it*s resting itself to factory state;
vii.Then WWD goes into hibernation (Shipping Mode).
OR
