Replacing the Battery of a Mini Tag
WERA bit with long neck
The long neck, which is narrower diameter than the head, prevents damage to the enclosure
during removal or subsequent replacement of the screws.
Non-Conducting Spudger
A non-conducting (plastic) screwdriver or a sharp-edged spudger can make removal of the
original battery easier:
Non-conducting spudger
The sharp end should be small enough to fit into the enclosure without interfering with any of the
small components present on the carrier PCB.
Battery Replacement Process for Mini Tags
The process for replacing batteries in Mini Tags is shown in the following figure.
6
