1
1. Install Feed Support and L Bracket to Grid Reflector
Install Feed Support and L Bracket to Grid Reflector by
M6X20 Bolt (Qty. 4)
M6 Spring Lock Washer (Qty. 4)
M6 Washer (Qty. 4)
Vertical Polarization
Horizontal Polarization
Vertical Polarization
Horizontal Polarization
2. Install Adapter and Connect Network Cable
to Antenna Feed
Insert Adapter into the Feed Support.
Route network cable through the bottom hole of the Feed Support and
attach to the RJ-45 slot on the back of the Antenna Feed.
2
3
3. Install Antenna Feed
Insert Antenna Feed into the Adapter.
Polarization of the W-DSL antenna must match the device that it will be
communicating with (Horizontal to Horizontal, Vertical to Vertical). For
Vertical polarization, the Grid Reflector and Antenna Feed must
match figure
3A
. For Horizontal polarization the Grid Reflector and
Antenna Feed must match figure
3B
.
A
B
4
4. Install Feed Support Bushing to Feed Support
Wrap network cable with the Feed Support Bushing and then slide it
into the hole in the Feed Support .
5
5. Attach Antenna to Pole
Mounting bracket can accommodate 1.25"-2.2" pole.
Attach antenna assembly to pole by
M6 U-Bolt (Qty.
2
)
Pole Bracket Clamp (Qty. 2)
M6 Serrated Flange Nut (Qty. 4)
H K
A
D
D
B
D
C
C
D
G
F
I
I
F
G
B
B
A
A
C
B
D
L
E
J
H
K
A
D
E
J
D
B
C
B
D
L
