background image

Important Warning Regarding Emergency Calls

NOTE THAT THE LIMITATIONS SET FORTH BELOW ARE APPLICABLE TO 
ALL EMERGENCY CALLS, FUNCTIONS AND SERVICES, INCLUDING 911, 
ENHANCED 911 AND 112 CALLS (COLLECTIVELY, “EMERGENCY SERVICES”). 
1.  You should be aware that:

a.  Emergency Services may not connect to the Public Service 

Answering Point (“PSAP”), or may ring to the administrative line 
of the PSAP, which may not be staffed after hours, or by trained 
emergency operators.

b.  VoIP customers may need to provide location or other information 

to their VoIP providers, and update this information if they change 
locations, for their Emergency Services to function properly.

c.  VoIP service may not work during a power outage, or when 

the Internet connection fails or becomes overloaded. Consider 
installing a backup power supply, maintaining a traditional phone 
line or having a wireless phone as a backup.

d.  VoIP service will not function if the telephone equipment or other 

equipment necessary to place calls is not correctly configured.

e.  Emergency Services may correctly connect to the PSAP, but may 

not transmit the user’s phone number and/or location information.

f. 

VoIP calls may not be capable of being received and/or processed 
by an emergency call center due to the center’s technical 
limitations.

g.  VoIP calls may be affected by other factors or force majeure events, 

such as the quality of the broadband connection and network 
congestion.

2.  You should:

a.  Provide your accurate physical address to your interconnected 

VoIP service provider to ensure that emergency services can 
quickly be dispatched to your location.

b.  Be familiar with your VoIP service provider’s procedures for 

updating your address, and promptly update address information 
in the event of a change.

c.  Have a clear understanding of any limitations of your Emergency 

Services.

d.  Inform children, babysitters and visitors about your VoIP service 

and its Emergency Services limitations.

3.  By installing the phone, you are affirmatively acknowledging that (i) 

you have read and understood this Warning, (ii) you understand that 
you may not be able to contact emergency services by dialing or using 
any Emergency Service, and (iii) you understand that you must inform 
users of the phone that they may not be able to contact emergency 
services by dialing or using any Emergency Service. 

4. 

IN NO EVENT SHALL UBIQUITI NETWORKS, ITS AFFILIATES, 
OFFICERS, DIRECTORS, EMPLOYEES, REPRESENTATIVES, AGENTS 
OR ANY OTHER THIRD‑PARTY PROVIDER OR VENDOR WHO MAY 
FURNISH SERVICES OR PRODUCTS TO YOU IN CONNECTION WITH 
THE VOIP SERVICES OR THE EQUIPMENT BE HELD LIABLE FOR 
ANY CLAIM, DAMAGE, OR LOSS WHATSOEVER ARISING FROM OR 
RELATING TO EMERGENCY SERVICES, AND YOU HEREBY WAIVE 
ANY AND ALL SUCH CLAIMS OR CAUSES OF ACTION ARISING 
THEREFROM OR RELATING THERETO.

Summary of Contents for UT-Phone-Touch



















Reviews: