Ports
Locking Notch
Cable Feed Plug
Reset Button
Ethernet Port
Locking Notch
The Locking Notch will be used with the
Mounting Bracket to help secure the UniFi AP. (This is described
further in the Mounting Bracket section.)
Ethernet
This Gigabit Ethernet port is used to connect
the power and should be connected to the LAN and DHCP
server. Power can be provided by a Ubiquiti Networks
UniFi Switch with PoE or Gigabit PoE adapter (included with
single-pack only).
Reset
The Reset button serves two functions for the UniFi AP:
•
Restart
Press and release the Reset button quickly.
•
Restore to Factory Default Settings
Press and hold the
Reset button for more than five seconds.
Alternatively, the UniFi AP may be reset remotely via a Reset
button located on the bottom of the Gigabit PoE adapter.
Cable Feed Plug
If your Ethernet cable feeds along the
mounting surface, remove the Cable Feed Plug.
