Introduction
Thank you for purchasing the Ubiquiti Networks®
UniFi® 802.11ac Wave 2 Enterprise Wi-Fi Access Point.
This Quick Start Guide is designed to guide you through
installation and includes warranty terms.
IMPORTANT:
The UAP-AC-HD requires the UniFi Controller
v5.3 or newer, available at: downloads.ubnt.com/unifi
Package Contents
UniFi AP AC HD
Mounting Bracket
Ceiling Backing Plate
Flat Head Screws
(Qty. 4)
Keps Nuts
(Qty. 4)
Screws
(Qty. 4)
Screw Anchors
(Qty. 4)
802.11AC Wave 2
Access Point
Model: UAP-AC-HD
Gigabit PoE* (48V, 0.5A)
with Mount Bracket
Power Cord*
Quick Start
Guide
* Included only in the single-pack of the UAP-AC-HD
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet
cable and earth grounding must be used as conditions of product warranty. TOUGHCable
™
is designed for outdoor installations. It is the customer’s responsibility to follow local country
regulations, including operation within legal frequency channels, output power, and Dynamic
Frequency Selection (DFS) requirements.
