Ubiquiti UniFi SmartPower USP-RPS, Quick Start Manual

Page: 4 / 23

LAN Port
Reset Button
USP RPS LED (Ports 1 - 6)
USP Connect DC Output (Ports 1 - 6)
Power Port
The RJ45 port supports a 10/100/1000 Ethernet connection. Set to DHCP Client by
default.
Resets to factory defaults. The device should be running after bootup is complete.
Press and hold the Reset button for about 10 seconds until the display indicates that
the device has reset itself. After a few seconds, the LED will turn off, and the device
will automatically reboot.
The LED lights up blue when there is an active power connection.
Connect the included USP Cable to a UniFi device with a USP Connect DC input.
(Additional USP cables are sold separately as model USP-Cable.)
Connect the included Power Cord to the Power port.
Installation Requirements
Phillips screwdriver
Standard-sized, 19" wide rack with a minimum of 1U height available
For indoor applications, use Category 5 (or above) UTP cabling approved for indoor
use.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD