Ubiquiti UniFi Protect ViewPort UFP-VIEWPORT, Quick Start Manual, Page: 17 / 20

UFP-VIEWPORT
Weight
Without TV Mount 230 g (8.11oz)
With TV Mount 252 g (8.89 oz)
Enclosure Polycarbonate
Networking Interface 10/100/1000 Ethernet Port
Management Interface UniFi Protect Controller
Max. Power Consumption 9.5W
Power Method 802.3af PoE
Button Reset/Factory Reset
LED Power/Status
ESD/EMP Protection Air: ± 8kV, Contact: ± 4kV
Operating Temperature 0 to 40° C (32 to 104° F)
Operating Humidity 20 to 80% Noncondensing
Certi cations CE, FCC, IC
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories speci ed by the manufacturer.
WARNING: Do not use this product in location that can be submerged by water.
WARNING: Avoid using this product during an electrical storm. There may be a remote risk of
electric shock from lightning.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current requirements indicated on
the manufacturer’s label. Connection to a different power source than those speci ed may result in
improper operation, damage to the equipment or pose a re hazard if the limitations are not
followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided only by a
quali ed service technician.
Limited Warranty
ui.com/support/warranty
UFP-VIEWPORT Quick Start Guide