Ubiquiti UniFi nanoHD, Quick Start Manual

Page: 3 / 26

Reset
Ethernet
Cable Feed Plug
Locking Tab
The Locking Notch will be used with the Mounting Bracket to help secure the
UniFi AP. (This is described further in the Mounting Bracket section.)
The Reset button serves two functions for the UniFi AP:
Restart Press and release the Reset button quickly.
Restore to Factory Default Settings Press and hold the Reset button for more
than five seconds.
This Gigabit Ethernet port is used to connect the power and should be connected
to the LAN and DHCP server.
If your Ethernet cable feeds along the mounting surface, remove the Cable Feed
Plug.
Mounting Bracket
During installation, the Locking Tab on the Mounting Bracket moves from the
UAP-nanoHD Quick Start Guide