5
Network Topology Requirements
Hardware Installation
The UniFi AP-Pro can be mounted to the wall or ceiling. Perform
the steps for the appropriate installation:
Wall Mount
1. Position the
Mounting Bracket
at the desired location on the
wall with the cable feed slot pointed towards the floor.
2. Use a pencil to mark the three holes on the wall. Use a 6 mm
drill bit to drill the holes in the wall.
Top
Optional 25 mm Hole for Ethernet
Cable Feed through Wall
3. (Optional) If your Ethernet cable feeds through the wall, cut or
drill a circle that is approximately 25 mm in size and lines up
with the cable feed slot.
4. Insert the
M3x20 Screw Anchors
into the 6 mm holes. Secure the
Mounting Bracket
to the wall by inserting the
M2.9x20 Screws
into the anchors.
Summary of Contents for UniFi AP PRO
Page 1: ...Enterprise WiFi System...
Page 2: ......
