UF-Instant
Power Supply
3.3V
Max. Power Consumption
2W
Supported Voltage Range
3.3V
Processor Specs
MIPS 100 MHz
Memory Information
32 MB DDR
Operating Temperature
-10 to 45° C (14 to 113° F)
Operating Humidity
10 to 90% Noncondensing
Certi cations
CE, FCC, IC
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories speci ed by the manufacturer.
WARNING:
To reduce the risk of re or electric shock, do not expose this product to rain or
moisture.
WARNING:
Do not use this product in location that can be submerged by water.
WARNING:
Avoid using this product during an electrical storm. There may be a remote risk of
electric shock from lightning.
WARNING:
CLASS 1 LASER PRODUCT, IEC/EN 60825‐1:2014 - Do not look into the ends of the
ber optic cable or SFP modules while converters are powered.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current requirements indicated on
the manufacturer’s label. Connection to a different power source than those speci ed may result in
improper operation, damage to the equipment or pose a re hazard if the limitations are not
followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided only by a
quali ed service technician.
Limited Warranty
UF-Instant Quick Start Guide
