UDM-Pro Quick Start Guide
http://dl-origin.ubnt.com/qsg/UDM-Pro/UDM-Pro_EN.html[03.04.2020 10:43:36]
HDD Bay
RJ45 LAN (Ports 1 - 8)
RJ45 Internet (Port 9)
SFP+ Internet (Port 10)
SFP+ LAN (Port 11)
Reset Button
USP RPS LED
USP Connect DC Input
Power Port
Green
Link Established at 1 Gbps
Flashing Indicates Activity
White
Link Established at 10 Gbps
Flashing Indicates Activity
Install a 3.5" or 2.5" HDD (not included) to use the device as an NVR for UniFi Protect.
The RJ45 ports support 10/100/1000 Ethernet connections. By default, they are set to
DHCP Server with the fallback IP address, 192.168.1.1/24.
The RJ45 port supports a 10/100/1000 Ethernet connection. Set to DHCP Client by default.
The SFP+ port supports a 1/10G Ethernet connection. Set to DHCP Client by default.
The SFP+ port supports a 1/10G Ethernet connection. By default, it is set to DHCP Server
with the fallback IP address, 192.168.1.1/24.
Resets to factory defaults. The device should be running after bootup is complete. Press
and hold the Reset button for about 10 seconds until the display indicates that the device
has reset itself. After a few seconds, the LED will turn off, and the device will automatically
reboot.
Reserved for future use.
Reserved for future use.
Connect the included Power Cord to the Power port.
