background image

Español

La Directiva 2002/96/CE de la UE exige que los equipos que lleven este 
símbolo en el propio aparato y/o en su embalaje no deben eliminarse 
junto con otros residuos urbanos no seleccionados. El símbolo indica 
que el producto en cuestión debe separarse de los residuos domésticos 
convencionales con vistas a su eliminación. Es responsabilidad suya 
desechar este y cualesquiera otros aparatos eléctricos y electrónicos a 
través de los puntos de recogida que ponen a su disposición el gobierno y 
las autoridades locales. Al desechar y reciclar correctamente estos aparatos 
estará contribuyendo a evitar posibles consecuencias negativas para el 
medio ambiente y la salud de las personas. Si desea obtener información 
más detallada sobre la eliminación segura de su aparato usado, consulte a 
las autoridades locales, al servicio de recogida y eliminación de residuos de 
su zona o pregunte en la tienda donde adquirió el producto.

Français

La directive européenne 2002/96/CE exige que l’équipement sur lequel 
est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté 
avec les autres ordures ménagères. Ce symbole indique que le produit 
doit être éliminé dans un circuit distinct de celui pour les déchets des 
ménages. Il est de votre responsabilité de jeter ce matériel ainsi que tout 
autre matériel électrique ou électronique par les moyens de collecte 
indiqués par le gouvernement et les pouvoirs publics des collectivités 
territoriales. L’élimination et le recyclage en bonne et due forme ont pour 
but de lutter contre l’impact néfaste potentiel de ce type de produits 
sur l’environnement et la santé publique. Pour plus d’informations sur le 
mode d’élimination de votre ancien équipement, veuillez prendre contact 
avec les pouvoirs publics locaux, le service de traitement des déchets, ou 
l’endroit où vous avez acheté le produit.

Italiano

La direttiva europea 2002/96/EC richiede che le apparecchiature 
contrassegnate con questo simbolo sul prodotto e/o sull’imballaggio non 
siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica 
che questo prodotto non deve essere smaltito insieme ai normali rifiuti 
domestici. È responsabilità del proprietario smaltire sia questi prodotti sia 
le altre apparecchiature elettriche ed elettroniche mediante le specifiche 
strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il 
corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze 
potenzialmente negative per l’ambiente e per la salute dell’essere umano. 
Per ricevere informazioni più dettagliate circa lo smaltimento delle vecchie 
apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti 
pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel 
quale avete acquistato il prodotto.

Summary of Contents for UAP-PRO

























Reviews: