7
Hardware Installation
Connecting Ethernet
1. Connect an Ethernet cable from the Ethernet port of your
computer to the Management port of the TOUGHSwitch.
2. Connect Ethernet cables from the Ethernet ports of your
devices to the numbered ports of the TOUGHSwitch.
Note:
PoE is disabled by default on all numbered ports
and is not available on the Management port. To enable
PoE on the appropriate ports, use the Ports tab in the
Configuration Interface.
Summary of Contents for TS-5-POE ToughSwitchPoE
Page 1: ...5 Port Power over Ethernet Managed Switch Model TS 5 POE...
Page 2: ......
Page 19: ......
