Hardware Overview
Reset
Button
Power
Terminal
Battery and NTC
Thermistor Terminal
Ethernet
Ports
Output
LED
System
LED
PV Panel
Terminal
PV Panel
Terminal
Note:
NTC Thermistor must be connected in order for
the battery to charge.
Interface
Description
System LED
Steady on when system is powered on;
Red when battery polarity is reversed.
Reset
Button
Press and hold the Reset button for 10
seconds to restore factory default settings.
Press and hold the Reset button for 16
seconds if:
• The device does not respond to a factory
reset.
• The web interface is unreachable.
• There doesn't appear to be any other
noticeable activity.
Battery and
NTC Thermistor
Terminal
Terminal block for NTC Thermistor and
battery. (NTC Thermistor must be connected
in order for the battery to charge.)
Power Terminal
Two-pin terminal block for power (24VDC out)
PV Panel Terminals H4 connectors for solar panel
Maximum open circuit voltage 60V
Ethernet Ports
Supports 10/100 Fast Ethernet connections
and passive 24V, 2-pair PoE output.
Output LED
Steady on when output power is enabled.
